Chapter 3 of 8 · Juniper JNCIP-ENT JN0-650
IP Multicast
Addressing, traffic flow, ASM and SSM, RPF, IGMP, PIM sparse mode, RP, MSDP, scoping and policy.
- 5topics
- 27 minfast track
- 3diagrams and exhibits
Topics in this chapter
Take them in order, or jump to the one you need.
- 1Multicast Concepts, Addressing and Traffic FlowJN0-650 study page on IP multicast concepts: components, IPv4 and IPv6 group addresses, MAC mapping, shared and source trees, and…Diagram6 min
- 2ASM, SSM and Reverse Path ForwardingJN0-650 study page on any-source and source-specific multicast, plus the RPF check on Junos: inet.0 and inet.2, RPF failures and…Diagram6 min
- 3IGMP and IGMP SnoopingJN0-650 study page on IGMP versions, querier election, timers, join and leave behavior, static groups and IGMP snooping on Junos…5 min
- 4PIM Sparse Mode RP, Anycast RP and MSDPJN0-650 study page on PIM sparse mode RP operation: static, Auto-RP and BSR discovery, election, anycast RP, PIM anycast, and…Diagram5 min
- 5Multicast Policy, Scoping and TroubleshootingJN0-650 study page on multicast scoping and routing policy on Junos, plus configuring and troubleshooting IGMP, PIM sparse mode…5 min
About this chapter
What this chapter covers
IP multicast sends one stream from a source to many receivers, and the network copies it only where paths split. The chapter covers the addresses, the host protocol (IGMP), the router protocol (PIM sparse mode), the rendezvous point, and the tools that connect and limit multicast domains.
Expect show pim and show multicast output, small protocols pim and protocols igmp excerpts, and "why is the traffic not arriving?" scenarios. Many of them come down to RPF.
It has 12 outline topics, and five pages cover them.
How the topics fit together
Learn the addresses and the flow of a stream first. Then learn the two service models and the RPF check that protects every tree. IGMP and PIM follow, and the last pages cover the RP in depth and the controls around it.
For almost any multicast fault, check the unicast routing and the RPF interface before anything else. Multicast depends on unicast routes to the source or the RP.
How to use these pages
Each topic page has the same shape, so you can skim for what you need.
- What it is: the idea in plain words.
- How it works: the mechanism, with configuration and tables.
- Common mistakes: the classic traps.
- What to remember for the exam: the facts to memorize.
- Check yourself: three questions to test your understanding.
Ready for more practice?
The full Juniper JNCIP-ENT JN0-650 question bank has 858 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.