Chapter 2 of 5 · Cisco CCNA 200-301 v2.0
Switching and Network Access
Trunks, SVIs, EtherChannel, edge ports, CDP and LLDP, troubleshooting, Rapid PVST+.
- 6topics
- 34 minfast track
- 3diagrams and exhibits
- 25%of the exam
Topics in this chapter
Take them in order, or jump to the one you need.
- 1Trunks and SVIsConfigure Layer 2 and Layer 3 switch interfaces, 802.1Q trunks, the native VLAN and SVIs, and read show interfaces trunk output…Diagram6 min
- 2EtherChannel and LACPBundle links with LACP into Layer 2 and Layer 3 port channels, learn which modes form a bundle, and read show etherchannel…5 min
- 3Edge Port AttributesConfigure switch ports for desktops, printers, IoT, IP phones, access points, virtualized hosts and appliances with VLAN, PoE…6 min
- 4CDP and LLDP for Network DocumentationUse CDP and LLDP neighbor output to check a network diagram, spot wrong ports, missing neighbors and stale documentation, and…5 min
- 5Layer 2 and Layer 3 Troubleshooting ToolsTroubleshoot Layer 2 and Layer 3 faults with show commands, show logging, ping, extended ping, traceroute and packet capture…6 min
- 6Rapid PVST+Configure Rapid PVST+, set the root bridge with primary and secondary, read port roles and states, and use PortFast, root guard…Diagram6 min
About this chapter
What this chapter covers
Switching and Network Access is about how switches connect to each other, to routers and to the devices at the edge of the network.
You configure the links, check that the network matches its documentation, and find faults with show commands and test tools. The chapter follows domain 2 of the CCNA 200-301 v2.0 exam topics. It has five objectives, covered by six pages.
Weight in the exam
Domain 2 carries about 25 percent of the v2.0 exam, level with Network Infrastructure and Connectivity.
The v2.0 weights are 25, 25, 20, 20 and 10 percent for the five domains. This domain is a quarter of the exam, so the commands and output on these pages are worth learning properly. Many objectives say configure, validate or troubleshoot, so expect to read output as well as recall commands.
How the topics fit together
The pages follow a campus network from the cable up to the loop protection that keeps it stable.
The topics build in this order:
- Trunks and SVIs join switches and give each VLAN a Layer 3 gateway.
- EtherChannel with LACP bundles parallel links so Spanning Tree does not block them.
- Edge port attributes set up VLANs, PoE and trunks for the devices people plug in.
- CDP and LLDP show real neighbors, so you can validate a network diagram.
- Layer 2 and Layer 3 troubleshooting tools are the show commands, ping, traceroute and capture output you use when something breaks.
- Rapid PVST+ keeps all this redundancy from creating loops.
When a question shows output, first decide which layer it belongs to. Interface and trunk output is Layer 1 and 2, ping and traceroute are Layer 3.
How to use these pages
Each topic page has the same shape, so you can skim for what you need.
- What it is: the idea in plain words.
- How it works: the mechanism, with example commands and output.
- Common mistakes: the classic traps.
- What to remember for the exam: the facts to memorize.
- Check yourself: three prompts to test your understanding.
Ready for more practice?
The full Cisco CCNA 200-301 v2.0 question bank has 1,242 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Cisco. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.