Chapter 3 of 5 · Cisco CCNA 200-301 v2.0

IP Routing

Reading the routing table, static routes, OSPFv2 and OSPFv3, and HSRP and VRRP status output.

  • 4topics
  • 24 minfast track
  • 5diagrams and exhibits
  • 20%of the exam

Topics in this chapter

Take them in order, or jump to the one you need.

  1. 1Reading the Routing TableInterpret a Cisco routing table: route codes, prefix and mask, administrative distance, metric, default route, and how longest…6 min
  2. 2Static Routing TroubleshootingTroubleshoot IPv4 and IPv6 static routes: default, network, host and floating static routes, why a route is missing from the…Diagram6 min
  3. 3OSPFv2 and OSPFv3Configure and verify single area OSPFv2 and OSPFv3: neighbor adjacencies, point to point and broadcast networks, DR and BDR…Diagram6 min
  4. 4HSRP and VRRP StatusInterpret HSRP and VRRP status output: show standby brief, show vrrp brief, active and standby roles, priority, preempt, virtual…Diagram6 min

About this chapter

What this chapter covers

IP Routing is about how routers move packets between networks, and how you find out why they did not.

It explains how to read a routing table and work out the next hop for a packet. It then covers static routes, single area OSPF for IPv4 and IPv6, and the status output of the first hop redundancy protocols HSRP and VRRP.

The chapter follows domain 3 of the Cisco CCNA 200-301 v2.0 exam topics. It has four objectives, and each gets its own page.

Weight in the exam

Domain 3, IP Routing, carries about 20 percent of the v2.0 exam. The five domain weights are 25, 25, 20, 20 and 10 percent.

Many objectives in v2.0 ask you to interpret or troubleshoot, not just configure. Expect output to read: a routing table, a neighbor list, a standby status screen.

Exam tip

For every command on these pages, know the output as well as the syntax. The exam shows you the output and asks what is wrong.

How the topics fit together

The pages build on each other, so read them in order.

Static routestyped by handinstall intoRouting tableread and interpretOSPFv2 and OSPFv3learned dynamicallyinstall intoRouting tableRouting tablebest matchdecidesNext hopwhere the packet goesHostsone default gatewayprotected byHSRP and VRRPvirtual gateway

The pages in short:

  • Reading the routing table teaches you to take a route apart (code, prefix, mask, administrative distance, metric, next hop) and to pick the route a packet will use.
  • Static routing troubleshooting covers default, network, host and floating static routes for IPv4 and IPv6, and what a broken one looks like in the table.
  • OSPFv2 and OSPFv3 covers single area neighbor adjacencies, point to point and broadcast networks, the DR and BDR election and the router ID, and how to read the neighbor output.
  • HSRP and VRRP status shows how to interpret show standby and show vrrp output to see which router is forwarding and why.

How to use these pages

Each topic page has the same shape, so you can skim for what you need.

  • What it is: the topic in plain words.
  • How it works: the mechanism, with example commands and output.
  • Common mistakes: the classic traps.
  • What to remember for the exam: the facts to memorize.
  • Check yourself: three prompts to test your understanding.

Ready for more practice?

The full Cisco CCNA 200-301 v2.0 question bank has 1,242 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Cisco. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.