Chapter 1 of 5 · Cisco CCNA 200-301 v2.0

Network Infrastructure and Connectivity

Cabling, virtualization, IPv4, IPv6, wireless, client faults and DHCP.

  • 9topics
  • 55 minfast track
  • 1diagrams and exhibits
  • 25%of the exam

Topics in this chapter

Take them in order, or jump to the one you need.

  1. 1Interface and Cable IssuesDiagnose copper and fiber link faults: read interface status, CRC and collision counters, duplex and speed mismatches, signal…6 min
  2. 2Hypervisors, Virtual Machines and ContainersLearn what hypervisors, VMs and containers do, how Type 1 and Type 2 hypervisors differ, and how virtual switches connect…5 min
  3. 3Troubleshooting IPv4 AddressingTroubleshoot IPv4 configuration, assignment and subnetting: wrong mask, wrong gateway, overlapping subnets, duplicates, and…7 min
  4. 4IPv4 Subnetting PracticeWorked IPv4 subnetting practice with every step shown: find the network and broadcast, check gateways, spot overlaps and plan…7 min
  5. 5Troubleshooting IPv6 AddressingTroubleshoot IPv6 unicast addressing: global, unique local and link-local addresses, prefix sizing, SLAAC versus static, and the…6 min
  6. 6IPv6 Practice: Address Types, Prefixes and EUI-64Worked IPv6 practice: shorten and expand addresses, spot invalid ones, name unicast types, size /64 subnets and build modified…6 min
  7. 7Wireless PrinciplesUnderstand Wi-Fi principles for the CCNA: 2.4, 5 and 6 GHz bands, channel selection, RF terms like dBm and SNR, WPA2 and WPA3…6 min
  8. 8Troubleshooting Client ConnectivityTroubleshoot wired and wireless clients on Windows, macOS and Linux: read IP settings, test reachability step by step, find…6 min
  9. 9Troubleshooting DHCPv4Troubleshoot DHCPv4 on IOS: DORA, server pools and excluded addresses, ip helper-address relay, client interfaces, and show ip…Diagram6 min

About this chapter

What this chapter covers

Network Infrastructure and Connectivity is where the CCNA begins. It covers the parts a network is built from and the faults that stop a client from connecting.

The chapter follows domain 1 of the Cisco CCNA 200-301 v2.0 exam topics. It has seven objectives, and each gets its own page. Two of them, IPv4 and IPv6 addressing, also have a worked practice page.

Most objectives now start with a verb such as diagnose or troubleshoot. The pages therefore show what a fault looks like in output and how to read it.

Weight in the exam

Domain 1 carries about 25 percent of the v2.0 exam. The five domains are weighted 25, 25, 20, 20 and 10 percent, so this is one of the two largest.

It is also a broad domain, from copper pin out to radio channels to DHCP relay. Study it in small steps, and work the practice pages for subnetting and IPv6 on paper.

Note

Subnetting and IPv6 reward repetition. A few minutes of practice every day beats one long session.

How the topics fit together

The pages run from the physical link up to the client that uses it.

Linkcables and interfacesHostsvirtual machines and containersAddressingIPv4 and IPv6Wirelessradio and securityClientconnectivity and DHCP

The link comes first. The interface and cable page covers how to read status and error counters on copper and fiber.

Next are the hosts: hypervisors, virtual machines and containers, and how they attach to the network.

Then addressing. IPv4 troubleshooting covers masks, gateways, overlaps and public versus private ranges, and its practice page drills the subnet arithmetic. IPv6 follows the same pattern, with the unicast types, prefix sizing and EUI-64.

Wireless principles explain bands, channels, signal and security, because many clients connect that way.

The last two pages bring it together. Client troubleshooting walks from the link and IP settings outward to the gateway, a remote address and a name, on Windows, macOS and Linux. DHCPv4 troubleshooting covers how clients get their addresses and why they sometimes do not.

How to use these pages

Every topic page has the same five-part shape, so you always know where to look.

  • What it is
  • How it works
  • Common mistakes
  • What to remember for the exam
  • Check yourself

Ready for more practice?

The full Cisco CCNA 200-301 v2.0 question bank has 1,242 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Cisco. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.