Chapter 4 of 5 · Cisco CCNA 200-301 v2.0

Network Services and Security

AAA, SFTP/SCP, NAT/PAT, DNS records, IPsec VPNs, ACLs and Layer 2 security.

  • 7topics
  • 37 minfast track
  • 4diagrams and exhibits
  • 20%of the exam

Topics in this chapter

Take them in order, or jump to the one you need.

  1. 1Local Users and AAA ClientConfigure local usernames, SSH login on the vty lines, and a Cisco device as an AAA client for TACACS+ or RADIUS, with a local…5 min
  2. 2SFTP and SCPBack up and restore Cisco configurations and IOS images with SCP and SFTP over SSH, enable the SCP server, and see why TFTP and…5 min
  3. 3NAT and PATConfigure static NAT, dynamic NAT with a pool and PAT overload on IOS XE routers, learn the four address terms, and read show ip…Diagram6 min
  4. 4DNS RecordsDiagnose DNS record problems (A, AAAA, CNAME, MX, NS, PTR) with nslookup and dig, and find why a host, web application or mail…5 min
  5. 5IPsec VPNsDescribe IPsec remote access and site-to-site VPNs: IKE, ESP and AH, tunnel and transport modes, and the show commands that prove…5 min
  6. 6IPv4 ACLsConfigure IPv4 standard and extended, numbered and named ACLs on Cisco routers: wildcard masks, implicit deny, placement…Diagram6 min
  7. 7Layer 2 SecurityConfigure Layer 2 security on Cisco switches: port security, DHCP snooping, DAI, storm control and IPv6 RA guard, with show…Diagram5 min

About this chapter

What this chapter covers

Network Services and Security is about protecting the network and the devices in it, and about the services that keep users connected.

You configure who may log in to a device, move files securely, translate addresses, check that names resolve, filter traffic and harden switch ports. The chapter follows domain 4 of the Cisco CCNA 200-301 v2.0 exam topics. It has seven objectives, and each gets its own page.

Weight in the exam

Domain 4 carries 20 percent of the v2.0 exam. The five domains are weighted 25, 25, 20, 20 and 10 percent.

Most objectives here say Configure or Diagnose, so expect commands, show output and fault finding. Only the IPsec objective is a pure description.

How the topics fit together

The pages follow a packet from the device itself out to the internet and back.

Device accesslocal users and AAAFile transferSFTP and SCPAddress translationNAT and PATName lookupDNS recordsName lookupDNS recordsProtected pathsIPsec VPNsTraffic filtersACLsSwitch portsLayer 2 security
  • Local users and AAA decide who may manage a device, and what they may do.
  • SFTP and SCP copy configurations and software images over SSH instead of clear text.
  • NAT and PAT let private hosts reach the internet through public addresses.
  • DNS records turn names into addresses, and wrong records break access by name.
  • IPsec VPNs protect traffic that crosses an untrusted network.
  • IPv4 ACLs permit or deny traffic at a router.
  • Layer 2 security stops attacks that start from a user port.
Exam tip

Several pages share one habit: configure it, then prove it with a show command. Learn the verification command with every feature.

How to use these pages

Each topic page has the same five sections: what it is, how it works, common mistakes, what to remember for the exam, and three questions to check yourself.

Ready for more practice?

The full Cisco CCNA 200-301 v2.0 question bank has 1,242 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Cisco. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.