Chapter 1 of 9 · Juniper JNCIS-ENT JN0-352
Layer 2 Switching and VLANs
Bridging, frame processing, VLAN ports and tagging, native and voice VLANs, and inter-VLAN routing.
- 4topics
- 21 minfast track
- 1diagrams and exhibits
Topics in this chapter
Take them in order, or jump to the one you need.
- 1Bridging Components and Frame ProcessingLearn how a Junos switch bridges: the Ethernet switching table, MAC learning, forwarding, flooding, filtering, aging and the show…5 min
- 2VLAN Ports, Tagging, Native VLANs and Voice VLANsLearn Junos access and trunk ports, 802.1Q tagging, native-vlan-id, and how switch-options voip and LLDP MED place IP phones in a…5 min
- 3Configuring and Monitoring Interfaces, Ports and VLANsConfigure, monitor and troubleshoot Junos switch interfaces, ports and VLANs in ELS syntax, with LAG basics and the show commands…5 min
- 4Inter-VLAN RoutingLearn inter-VLAN routing on Junos: irb interfaces with l3-interface, default gateways, router on a stick, and how to configure…Diagram6 min
About this chapter
What this chapter covers
Layer 2 Switching and VLANs covers how a Junos switch builds its Ethernet switching table, forwards frames inside a VLAN and moves traffic between VLANs. It uses the Enhanced Layer 2 Software (ELS) configuration style found on current EX Series switches, with interface-mode, vlans and irb. Everything else in the enterprise exam, such as spanning tree and Layer 2 security, builds on it.
Questions are mostly single-answer and multiple-answer. Many show a short set or hierarchy listing, or show output, and ask what is wrong or what a frame will do. Reading the configuration carefully is the core skill.
It has 9 outline topics, and four pages cover them.
How the topics fit together
A frame arrives on a port, the switch decides which VLAN it belongs to, learns the source MAC address and then forwards, floods or drops it. Traffic that must leave the VLAN goes through a routed interface.
When a question describes hosts that cannot reach each other, first ask whether they are in the same VLAN. If they are, think ports and tags. If they are not, think IRB interfaces and default gateways.
How to use these pages
Each topic page has the same shape, so you can skim for what you need.
- What it is: the idea in plain words.
- How it works: the mechanism, with configuration and tables.
- Common mistakes: the classic traps.
- What to remember for the exam: the facts to memorize.
- Check yourself: three questions to test your understanding.
For each configuration example, trace one frame through it yourself before reading the explanation.
Ready for more practice?
The full Juniper JNCIS-ENT JN0-352 question bank has 846 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.