Juniper Mist Network Operations and Management · Topic 2 of 3
WAN Assurance and Routing Assurance
Learn Juniper Mist WAN Assurance and Routing Assurance: SRX and Session Smart WAN edges, WAN SLEs, application visibility and the Router Health SLE.
- 5 min
- WAN Assurance supports SRX Series Firewalls and Session Smart Routers as WAN edges.
- WAN SLEs: WAN Edge Health, WAN Link Health, Application Health and Gateway Bandwidth.
- WAN Edge Health covers the device; WAN Link Health covers circuits and interfaces; Application Health covers per application latency, jitter and loss.
What it is
WAN Assurance is the Juniper Mist service for the WAN edge, the device that connects a site to the internet, to MPLS or to an SD-WAN overlay. It adds SLEs, insights, troubleshooting and SD-WAN management to that edge, so you can see how WAN performance affects users from client to cloud.
Routing Assurance is a cloud based Day 2 operations service for routers. It collects telemetry from Junos and Junos Evolved routers, scores their health with the Router Health SLE and helps you respond to network events before users notice.
How it works
WAN edge devices
WAN Assurance works with two device families. Their monitoring tools differ.
| WAN edge | How Mist measures the WAN |
|---|---|
| Session Smart Router (SSR) | Secure Vector Routing tracks liveness, jitter, latency, loss and mean opinion score (MOS) for each path |
| SRX Series Firewall | Tracks utilization of the IPsec tunnels that form the overlay, plus Junos interface data |
Both are onboarded, configured and upgraded from the Mist dashboard, including zero touch provisioning. The same portal then shows the SLEs, events and Marvis findings.
WAN SLEs
Select a site, then Monitor > Service Levels and the WAN button. With Entire Org selected you see only summary information.
| WAN SLE | Classifiers |
|---|---|
| WAN Edge Health | WAN Edge Disconnected, System, Table Capacity, DHCP Pool |
| WAN Link Health | Network, Interface |
| Application Health | Jitter, Latency, Loss, Application Services |
| Gateway Bandwidth | Bandwidth Headroom, Congestion Uplink |
The sub-classifiers narrow the cause further:
- System covers Power, Memory, CPU Data Plane, CPU Control Plane, Temp Chassis and Temp CPU.
- Table Capacity covers FIB and Flow.
- Network (WAN Link Health) covers Peer Path Down, Loss, Jitter and Latency.
- Interface covers Cable Issues, Congestion, LTE Signal, Port Down, Negotiation Incomplete and VPN.
- Application Services applies to SSR only and covers Slow Application, Application Bandwidth and Application Disconnects.
Read the SLE name first. WAN Edge Health is about the box, WAN Link Health is about the circuits and ISP, and Application Health is about how individual applications perform across those links.
Application visibility
WAN Assurance combines Application Visibility with the Application Health SLE. You can see which applications are in use, by how many clients, and whether a specific application is suffering from latency, jitter or loss. Remediation can be to prioritize or block applications, or to ask the ISP for more bandwidth when Gateway Bandwidth shows the link is full.
Marvis on the WAN
Marvis correlates Wi-Fi, wired and WAN data. A natural language question about a poor video call can show the path through the AP, the switch and the WAN edge, and point to the failing segment.
Routing Assurance
Routing Assurance covers routers rather than branch WAN edges. Its main measure is the Router Health SLE, which records failure minutes when a KPI crosses its threshold. It is found under Monitor > Service Levels > Routing > Router Health.
| Router Health classifier | What it covers |
|---|---|
| Router Unreachable | The cloud cannot reach the router |
| Network | WAN Jitter and WAN Latency |
| System | CPU and Memory (90 percent thresholds) and Temperature |
| Capacity | Route Table and ARP Table (80 percent thresholds) |
Clicking the Router Health widget opens a root cause analysis page with Statistics, Timeline, Distribution and Affected Items tabs. View Insights opens Router Insights, which lines up router events such as configuration changes and disconnects against the SLE. Router level tools include router charts, interface queues and BGP summary information.
Benefits compared
| WAN Assurance | Routing Assurance | |
|---|---|---|
| Devices | SRX Series and Session Smart Routers at the WAN edge | Routers running Junos or Junos Evolved |
| Main SLEs | WAN Edge Health, WAN Link Health, Application Health, Gateway Bandwidth | Router Health |
| Focus | User and application experience across the WAN | Router health, capacity and events |
| Shared tools | Mist portal, Insights, Marvis | Mist portal, Router Insights |
Common mistakes
Putting WAN Link Health problems on the device. A bad cable, a down port or poor LTE signal is a WAN Link Health Interface classifier, not WAN Edge Health.
Expecting full org detail in WAN SLEs. WAN SLE blocks appear when a site is selected; Entire Org shows only a summary.
Treating Routing Assurance as SD-WAN. Routing Assurance monitors router health and events. Branch SD-WAN with application steering is WAN Assurance.
Some classifiers exist only on one platform. Application Services is SSR only, and Negotiation Incomplete and Congestion Uplink are SRX only. Watch for options that place them on the wrong platform.
What to remember for the exam
- WAN Assurance supports SRX Series Firewalls and Session Smart Routers as WAN edges.
- WAN SLEs: WAN Edge Health, WAN Link Health, Application Health and Gateway Bandwidth.
- WAN Edge Health covers the device; WAN Link Health covers circuits and interfaces; Application Health covers per application latency, jitter and loss.
- SSR measures paths with Secure Vector Routing, including MOS.
- Application Visibility with the Application Health SLE gives per application troubleshooting.
- Routing Assurance is a cloud based Day 2 service for routers, with the Router Health SLE.
- Router Health classifiers: Router Unreachable, Network, System and Capacity.
- Router Insights correlates configuration changes and disconnects with SLE impact.
Check yourself
Users at a branch report poor service and the WAN Link Health SLE shows the Interface classifier. What kind of cause is most likely?
A link level issue such as cable issues, congestion, a port down or weak LTE signal on the WAN edge interface.
Which WAN SLE classifier applies only to Session Smart Routers?
Application Services, which covers slow applications, application bandwidth and application disconnects.
A router's route table is nearly full. Where does Routing Assurance show this?
In the Router Health SLE under the Capacity classifier, which tracks route table and ARP table use.
Topic 2 of 3 in Juniper Mist Network Operations and Management
Test yourself on Juniper Mist Network Operations and Management
The full Juniper JNCIA-MistAI JN0-253 question bank has 668 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.