Juniper Mist Network Operations and Management · Topic 1 of 3

Wi-Fi Assurance and Wired Assurance

Learn Juniper Mist Wi-Fi Assurance and Wired Assurance: wireless and wired SLEs, AI driven RRM, dynamic packet capture, templates and Day 0 to Day 2.

  • 5 min
In a nutshell
  • Wi-Fi Assurance has seven wireless SLEs: Time to Connect, Successful Connects, Coverage, Roaming, Throughput, Capacity and AP Health.
  • Wired SLEs are Successful Connect, Throughput and Switch Health.
  • SLEs are on Monitor > Service Levels; Wireless and Wired buttons switch the view.

What it is

Wi-Fi Assurance is the Juniper Mist cloud service for wireless networks built on Mist access points. It measures the experience of every wireless user, finds the root cause when that experience is poor, and automates routine work such as radio tuning.

Wired Assurance brings the same AI driven operations to switches. It covers the whole switch life cycle, from onboarding a new switch to troubleshooting a wired client, all from the Mist portal instead of device by device.

Mist APstelemetryMist cloudWi Fi AssuranceSLEs and RRMBetterwireless experienceSwitchestelemetryMist cloudWired AssuranceSLEs and templatesBetterwired experience

How it works

Wi-Fi Assurance features

FeatureWhat it gives you
Wireless SLEsA success rate for each part of the user experience, with classifiers that point at the cause
AI driven RRMAutomatic channel and power tuning based on the Capacity SLE
Dynamic packet captureAn automatic capture when a client fails to connect, saved to the cloud
InsightsEvents and charts for a site, an AP or a client
MarvisMarvis Actions and natural language troubleshooting

Wireless SLEs

Wi-Fi Assurance reports seven wireless SLEs under Monitor > Service Levels with the Wireless button.

SLEQuestion it answers
Time to ConnectDid the client connect quickly enough?
Successful ConnectsDid the connection attempt succeed at all?
CoverageWas the signal strong enough?
RoamingDid the client roam well between APs?
ThroughputCould the client get the expected speed?
CapacityWas enough channel capacity available?
AP HealthWere the APs themselves healthy?

When an SLE misses its threshold, the failure is assigned to a classifier. Coverage, for example, uses Weak Signal, Asymmetry Downlink and Asymmetry Uplink. AP Health uses Low Power, AP Disconnected, Ethernet and Network.

AI driven RRM

Mist Radio Resource Management (RRM) runs at two levels. Global RRM runs nightly per site and uses long term trend data from the Capacity SLE. Local RRM reacts to events that affect users right now.

A reinforcement learning feedback loop watches the Capacity SLE, including client count, client usage and interference, to check whether a channel or power change actually helped. If a problem is not hurting users, the change waits for the nightly global run.

Dynamic packet capture

When a wireless client fails to connect, the AP captures the failing exchange automatically and stores the file in the cloud. Triggers include DHCP and authorization failures and association failures. You download the capture from the event, so you do not need to reproduce the problem.

Wired Assurance features

Wired Assurance is usually described in three stages.

StageFeatures
Day 0, onboardingClaim switches with a claim code or activation code, adopt existing Junos switches, zero touch provisioning
Day 1, configurationTemplates, port profiles, dynamic port profiles, campus fabric (EVPN VXLAN)
Day 2, operationsWired SLEs, Marvis Actions, Marvis conversational troubleshooting, Insights

A new switch that reaches the cloud over its uplink fetches its configuration automatically. Dynamic port profiles assign a port profile automatically, based on LLDP information or MAC addresses, so an AP or a camera gets the right VLAN wherever it is plugged in.

Day 0claim or adoptonboardedDay 1templates and profilesrunningDay 2SLEs and Marvis

Wired SLEs

Wired SLEs appear under Monitor > Service Levels with the Wired button.

Wired SLEClassifiers
Successful ConnectDHCP, Authentication, Access Port Security
ThroughputStorm Control, Interface Anomalies, Switch Bandwidth, Congestion, Congestion Uplink, Bandwidth Headroom
Switch HealthSwitch Unreachable, Capacity, Network, System

Interface Anomalies breaks down further into Cable Issues, Negotiation Failed and MTU Mismatch. System covers CPU, Memory, Temp and Power.

Exam tip

Wired Assurance supports EX, QFX and CX Series switches. EX Series is the recommended choice where the switches connect Mist APs.

Benefits in one view

BenefitWi-Fi AssuranceWired Assurance
Measures user experienceWireless SLEsWired SLEs
Faster root causeClassifiers, dynamic packet captureClassifiers, switch insights
Less manual workAI driven RRMTemplates, ZTP, dynamic port profiles
One portalSame Mist portal and Marvis for both

Common mistakes

Mixing up Time to Connect and Successful Connects. Time to Connect covers clients that did connect but took too long. Successful Connects covers attempts that failed outright.

Thinking RRM changes channels every time it sees a problem. If the Capacity SLE shows no user impact, the change is deferred to the nightly global run.

Assuming Wired Assurance is only monitoring. It also onboards and configures switches through templates, port profiles and zero touch provisioning.

Watch out

Classifier names are tied to one SLE. Switch Unreachable belongs to the wired Switch Health SLE, while AP Disconnected belongs to the wireless AP Health SLE. Exam options often swap them.

What to remember for the exam

  • Wi-Fi Assurance has seven wireless SLEs: Time to Connect, Successful Connects, Coverage, Roaming, Throughput, Capacity and AP Health.
  • Wired SLEs are Successful Connect, Throughput and Switch Health.
  • SLEs are on Monitor > Service Levels; Wireless and Wired buttons switch the view.
  • A failed experience is assigned to one classifier, and classifiers add up to 100 percent of failures.
  • Global RRM runs nightly per site; local RRM reacts to events; both rely on the Capacity SLE.
  • Dynamic packet capture runs automatically on connection failures and is saved to the cloud.
  • Wired Assurance spans Day 0 (claim, adopt, ZTP), Day 1 (templates, port profiles, campus fabric) and Day 2 (SLEs, Marvis).
  • Dynamic port profiles assign a profile from LLDP or MAC address information.

Check yourself

  • Which wireless SLE would show that clients connected but DHCP was slow?

    Time to Connect, because it covers clients that did connect but took longer than the threshold.

  • What does Mist RRM do when a capacity problem is not affecting users?

    It defers the channel or power change to global RRM, which runs nightly per site.

  • A switch keeps reporting high CPU. Which wired SLE and classifier show it?

    The Switch Health SLE, under its System classifier, which covers CPU, memory, temperature and power.

Topic 1 of 3 in Juniper Mist Network Operations and Management

Test yourself on Juniper Mist Network Operations and Management

The full Juniper JNCIA-MistAI JN0-253 question bank has 668 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.