Chapter 4 of 7 · Juniper JNCIA-MistAI JN0-253

Juniper Mist Monitoring and Analytics

Service level expectations, packet captures, Mist Insights, alerts and audit logs.

  • 3topics
  • 15 minfast track
  • 1diagrams and exhibits

Topics in this chapter

Take them in order, or jump to the one you need.

  1. 1Service Level Expectations (SLEs)Learn Juniper Mist SLEs: success rate, thresholds, classifiers and sub-classifiers, the SLE block, Settings and the root cause…Diagram5 min
  2. 2Packet Captures and Juniper Mist InsightsLearn Juniper Mist dynamic and manual packet captures, switch captures, Wireshark use and the Insights page with its events and…5 min
  3. 3Alerts and Audit LogsLearn Juniper Mist alerts: Infrastructure, Marvis, Security and Certificate types, severities, Alerts Configuration and the…5 min

About this chapter

What this chapter covers

Monitoring and Analytics covers the portal tools you use once the network is running. SLEs measure the user experience and point at causes. Packet captures record the traffic itself. Insights show events and charts for a site, a device or a client. Alerts tell you when something needs attention, and audit logs record what administrators did.

Questions are mostly single-answer and multiple-answer. Many describe a symptom and ask which page, SLE or classifier shows the cause, or ask for a menu path such as Monitor > Service Levels or Organization > Admin > Audit Logs.

It has 5 outline topics, and three pages cover them.

How the topics fit together

A typical troubleshooting session moves from the broad view to the detail. An alert or a falling SLE tells you something is wrong, the classifier and Insights tell you where, and a packet capture shows exactly what happened on the wire.

Alertor falling SLEwhich causeClassifierand affected itemswhich eventInsightsevents and chartsproofPacket captureAdmin changerecorded inAudit logs

Audit logs sit beside this chain. When a problem starts right after a change, the audit log shows who changed what and when.

Exam tip

Learn where each tool lives. SLEs and Insights share Monitor > Service Levels, alerts are on Monitor > Alerts, manual packet captures are on Site > Packet Captures, and audit logs are on Organization > Admin > Audit Logs.

How to use these pages

Each topic page has the same shape, so you can skim for what you need.

  • What it is: the idea in plain words.
  • How it works: the mechanism, with tables and flow diagrams.
  • Common mistakes: the classic traps.
  • What to remember for the exam: the facts to memorize.
  • Check yourself: three questions to test your understanding.

The previous chapter lists which SLEs belong to each assurance service. This chapter explains how SLEs are measured and read.

Ready for more practice?

The full Juniper JNCIA-MistAI JN0-253 question bank has 668 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.