Chapter 7 of 10 · Juniper JNCIS-SP JN0-364
MPLS
Terms, the label header, forwarding, inet.3 and mpls.0, RSVP, LDP and segment routing LSPs on Junos.
- 5topics
- 29 minfast track
- 3diagrams and exhibits
Topics in this chapter
Take them in order, or jump to the one you need.
- 1MPLS Terminology, Header and ForwardingLearn MPLS terms for the JN0-364: LSR, LER, LSP and FEC, the 32 bit label header, push, swap and pop, end-to-end forwarding and…Diagram6 min
- 2Labels, the Label Information Base and Routing TablesLearn MPLS labels for the JN0-364: reserved labels 0 to 15, the label information base, mpls.0, inet.3 and how BGP next hops…6 min
- 3RSVP-Signaled LSPsLearn RSVP-TE for the JN0-364: Path and Resv messages, CSPF and the TED, explicit paths, and how to configure, verify and…Diagram6 min
- 4LDP-Signaled LSPsLearn LDP for the JN0-364: hello discovery, TCP sessions, loopback label advertisement, inet.3 preference 9 and how to configure…5 min
- 5Segment Routing with MPLSLearn segment routing for the JN0-364: node and adjacency SIDs, the SRGB, source-packet-routing in IS-IS, and verifying…Diagram6 min
About this chapter
What this chapter covers
MPLS is the core of the JNCIS-SP exam. It covers how routers forward packets by label instead of by destination address, how the label header is built, and which Junos routing tables hold labels and label-switched path (LSP) routes. It then covers the three ways Junos OS builds LSPs: RSVP, LDP and segment routing.
Questions are mostly single-answer and multiple-answer. Many show show mpls lsp, show ldp database or show route table inet.3 output and ask what a router does next, so reading label operations and routing tables is the core skill.
It has 12 outline topics, and five pages cover them.
How the topics fit together
Every LSP has the same shape: an ingress router pushes a label, transit routers swap it, and the label is popped near the egress. What changes between RSVP, LDP and segment routing is how the labels are agreed.
Learn the terms and the header first, then the routing tables, because every signaling page assumes you know that inet.3 is used to resolve BGP next hops and mpls.0 is the label table.
Memorize the reserved labels and the preferences. Label 0 is explicit null, label 3 is implicit null (penultimate hop popping), labels 0 to 15 are reserved, RSVP routes have preference 7 and LDP routes preference 9. Many questions turn on one of these numbers.
How to use these pages
Each topic page has the same shape, so you can skim for what you need.
- What it is: the idea in plain words.
- How it works: the mechanism, with configuration and tables.
- Common mistakes: the classic traps.
- What to remember for the exam: the facts to memorize.
- Check yourself: three questions to test your understanding.
For each output example, follow one label from the ingress router to the egress router before reading the explanation.
Ready for more practice?
The full Juniper JNCIS-SP JN0-364 question bank has 860 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.