Chapter 5 of 10 · Juniper JNCIS-SP JN0-364
Layer 2 Bridging or VLANs
MX bridge domains, frame processing, access and trunk ports, virtual switches, IRB and Q-in-Q tagging.
- 4topics
- 22 minfast track
- 2diagrams and exhibits
Topics in this chapter
Take them in order, or jump to the one you need.
- 1MX Bridging Elements and Frame ProcessingLearn MX Series bridging for the JNCIS-SP JN0-364: bridge domains, the default switch, MAC learning, flooding, filtering and…5 min
- 2VLAN Port Modes, Tagging and Bridge DomainsConfigure MX access and trunk ports, native VLANs, 802.1Q tags, bridge domains and VLAN normalization for the JNCIS-SP JN0-364…5 min
- 3Virtual Switches and IRBLearn MX virtual switch routing instances and integrated routing and bridging for the JNCIS-SP JN0-364: configuration…Diagram6 min
- 4Provider Bridging (Q-in-Q)Learn Q-in-Q provider bridging on MX routers for JNCIS-SP JN0-364: S-VLAN and C-VLAN tags, vlan-tags outer and inner, push and…Diagram6 min
About this chapter
What this chapter covers
Layer 2 Bridging or VLANs covers how an MX Series router acts as a switch. On the MX, VLANs are bridge domains, ports join them through family bridge or tagged units, virtual switches keep customers apart, IRB adds a routed gateway, and Q-in-Q stacks a provider tag on top of customer tags.
Questions are mostly single-answer and multiple-answer. Many show an interfaces or bridge-domains stanza and ask which VLAN a frame lands in, what tag leaves a port, or why a host cannot reach its gateway. Expect options that mix in EX switch syntax; the MX forms are bridge-domains, family bridge and routing-interface.
It has 12 outline topics, and four pages cover them.
How the topics fit together
Start with the bridge itself, then how ports carry VLANs, then the containers and gateways built on top, and finally the second tag a provider adds.
Learn VLAN normalization early. The bridge domain's vlan-id decides which tags are pushed, popped or swapped, and the same idea explains both tag translation and Q-in-Q on the MX.
Memorize the MX defaults and keywords: MAC aging 300 seconds, bridge domains at the top level belong to default-switch, trunks use vlan-id-list, native VLAN needs native-vlan-id, and IRB is attached with routing-interface irb.N.
How to use these pages
Each topic page has the same shape, so you can skim for what you need.
- What it is: the idea in plain words.
- How it works: the mechanism, with configuration and tables.
- Common mistakes: the classic traps.
- What to remember for the exam: the facts to memorize.
- Check yourself: three questions to test your understanding.
For each configuration example, pick one frame, note its tags, and walk it from the input port through the bridge domain to the output port.
Ready for more practice?
The full Juniper JNCIS-SP JN0-364 question bank has 860 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.