Chapter 3 of 10 · Juniper JNCIS-SP JN0-364
IS-IS
PDUs, TLVs, link-state database, levels and areas, adjacencies, DIS, metrics, policy and troubleshooting.
- 4topics
- 23 minfast track
- 1diagrams and exhibits
Topics in this chapter
Take them in order, or jump to the one you need.
- 1IS-IS PDUs, TLVs and the Link-State DatabaseLearn IS-IS hello, LSP, CSNP and PSNP PDUs, the key TLVs, LSP IDs, sequence numbers and the 1200 second lifetime, and show isis…5 min
- 2IS-IS Levels, Areas and AdjacenciesLearn the IS-IS NET, Level 1 and Level 2 routing, areas, the attached bit, adjacency rules and hello timers in Junos for the…Diagram6 min
- 3IS-IS DIS and MetricsLearn IS-IS DIS election with priority 64, the pseudonode, preemption, narrow and wide metrics, the default metric of 10 and…6 min
- 4Configure, Monitor and Troubleshoot IS-ISConfigure IS-IS in Junos with family iso and a NET, export and leak routes between levels with policy, and troubleshoot with show…6 min
About this chapter
What this chapter covers
IS-IS is the link-state interior gateway protocol most service provider networks run in their core. This chapter covers how IS-IS routers form adjacencies, how they describe the network in LSPs built from TLVs, how Level 1 and Level 2 divide the domain, how the DIS works on a LAN, how metrics are set, and how to configure, filter and troubleshoot IS-IS in Junos OS.
Questions are mostly single-answer and multiple-answer, often with show isis adjacency, show isis interface or show isis database output. Expect questions that compare IS-IS with OSPF, because the two protocols solve the same problem in different ways.
It has 10 outline topics, and four pages cover them.
How the topics fit together
IS-IS runs directly over Layer 2, not over IP. Every router needs an ISO address on its loopback and family iso on each IS-IS interface before anything else works.
Levels and areas decide which LSPs a router holds. TLVs decide what each LSP says. Metrics decide which path SPF picks, and routing policy decides which other routes enter IS-IS and how routes move between levels.
Memorize the Junos defaults: preference 15 for Level 1 internal and 18 for Level 2 internal, metric 10 on every interface except lo0 (0), both levels enabled on every interface, DIS priority 64.
How to use these pages
Each topic page has the same shape, so you can skim for what you need.
- What it is: the idea in plain words.
- How it works: the mechanism, with configuration and tables.
- Common mistakes: the classic traps.
- What to remember for the exam: the facts to memorize.
- Check yourself: three questions to test your understanding.
Where IS-IS behaves differently from OSPF, the pages say so. Those differences are a favorite source of exam questions.
Ready for more practice?
The full Juniper JNCIS-SP JN0-364 question bank has 860 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.