Chapter 6 of 7 · Juniper JNCIA-MistAI JN0-253

Location-based Services

How vBLE works, asset visibility for BLE tags, and vBLE engagement with the Mist SDK and beacons.

  • 2topics
  • 11 minfast track

Topics in this chapter

Take them in order, or jump to the one you need.

  1. 1vBLE Asset VisibilityLearn Juniper Mist vBLE asset visibility: enabling it per site, BLE tag types, asset filters, Live View, zones and the SUB-AST…5 min
  2. 2vBLE EngagementLearn Juniper Mist vBLE engagement: the 8 element antenna array, the Mist SDK, cloud location, virtual beacons, wayfinding and…6 min

About this chapter

What this chapter covers

Juniper Mist location services use the access points to work out where things are indoors. The key technology is virtual BLE (vBLE): Juniper APs with a directional Bluetooth Low Energy antenna array, plus location calculations done in the Mist cloud. No battery powered beacons have to be installed and no site survey is needed.

The outline splits location into two services. Asset visibility listens for BLE tags on equipment and shows where the equipment is. vBLE engagement sends BLE signals so a phone app built with the Mist SDK can find itself, guide the user and receive proximity notifications.

Questions in this chapter are mostly about which service fits a use case, which way the BLE signals travel, where a feature is turned on and which subscription it needs.

It has 2 outline topics, and two pages cover them.

How the topics fit together

The two services use the same APs and the same floor plan, but the BLE signal travels in opposite directions.

BLE tag on assettransmitsAP vBLE arraylistensreportsMist cloudasset on Live ViewAP vBLE arraytransmitsBLE beamsPhone with Mist SDKreportsMist cloudreturns x and y

Both services need the APs placed correctly on a floor plan in the portal, because every location is calculated against that map. Both are switched on in the same place: the Bluetooth based Location Services section of a site's configuration.

Exam tip

Ask "who is transmitting?" When a tag on a wheelchair transmits and the AP listens, it is asset visibility. When the AP transmits and a phone app listens, it is vBLE engagement.

How to use these pages

Each topic page has the same shape, so you can skim for what you need.

  • What it is: the idea in plain words.
  • How it works: the mechanism, with menus and tables.
  • Common mistakes: the classic traps.
  • What to remember for the exam: the facts to memorize.
  • Check yourself: three questions to test your understanding.

For each scenario on these pages, decide first whether a tag or a phone app is involved. That one choice usually rules out half the answer options.

Ready for more practice?

The full Juniper JNCIA-MistAI JN0-253 question bank has 668 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.