Marvis Virtual Network Assistant · Topic 3 of 3
Marvis Minis
Learn Marvis Minis, the Juniper Mist digital experience twin: what wireless and wired Minis test, when they run, and where failures show up in Marvis.
- 5 min
- Marvis Minis is a digital experience twin that emulates clients to test the network.
- It runs hourly, even with no clients, and on demand with Test Now.
- Wireless Minis runs on all Mist AP models; enabled by default from AP firmware 0.14.29313.
What it is
Marvis Minis is a network digital experience twin. It uses the network you already have, the Mist APs and supported EX switches, to pretend to be a user and test the services a real client needs: getting an address, resolving names, authenticating and reaching applications.
Because Minis creates its own test connections, it finds problems before users are affected and even when no clients are connected, for example overnight or before a site opens. No extra hardware, software, sensors or clients are needed.
How it works
Wireless and wired Minis
| Wireless Minis | Wired Minis | |
|---|---|---|
| Runs on | Juniper Mist APs (all AP models are supported) | EX4100, EX4400, EX4650 and QFX5120 switches on Junos OS 25.4R2 or later |
| Emulates | A wireless client | A client physically connected on a specific VLAN |
| Validates | DHCP, DNS, ARP, RADIUS and application reachability | DHCP, ARP, DNS, CURL, RADIUS (802.1X) and traceroute |
| Subscription | Marvis for Wireless | Marvis for Wired |
| Prerequisite | Enabled by default on APs running firmware 0.14.29313 or later | A supported switch model and Junos OS release |
Minis does not need a separate subscription of its own. Wireless Minis is available when the organization has an active Marvis for Wireless subscription, and wired Minis needs Marvis for Wired.
All APs in a site should run firmware 0.14.29313 or later; otherwise validations might be interrupted.
When Minis runs
Minis validates the network in two ways:
| Trigger | How it works |
|---|---|
| Scheduled | Validations run automatically every hour, even when no clients are connected |
| On demand | An administrator selects the site and clicks Test Now at the top right of the Marvis Minis page |
Juniper recommends a manual Test Now after a wireless configuration change or a hardware change, so you know straight away whether the change broke anything. A manual validation cannot start while an automatic one is in progress. Wired and wireless validations can run at the same time on different VLANs.
Juniper describes Minis as self configuring and auto learning, so the administrator does not have to build a list of tests by hand.
Where the results appear
| Place | What you see |
|---|---|
| Marvis > Marvis Minis | Test runs, their status and dashboard statistics |
| Marvis > Marvis Actions | Failures, listed under the Connectivity category |
A DHCP, ARP or DNS failure for a VLAN ID appears in Marvis Actions as soon as it is detected on all APs or switches tested. View More gives the details. Packet captures of the failed test can be downloaded as .pcap files from the paperclip icon next to the AP name.
After you fix the problem, the action can take up to 24 hours to disappear from the Marvis Actions page, because Minis must see the test pass again.
When an exam question says a failure was found "with no users on site" or "before the store opened", the answer is almost always Marvis Minis, because only Minis creates its own test traffic.
Minis compared with real client data
| Real client data (SLEs, client events) | Marvis Minis | |
|---|---|---|
| Needs users | Yes | No |
| Traffic source | Real devices | The AP or switch acting as a client |
| Best for | Measuring actual user experience | Catching problems before users arrive or after a change |
Minis results can also be sent to other systems. The webhook topics minis-application and minis-network carry Minis results, and both need an active Marvis subscription (SUB-VNA).
A worked example
A new VLAN is added to a WLAN at a branch, but the DHCP scope for it is never created. No staff are on site yet, so no real client fails.
- The next hourly Minis run emulates a client on that VLAN from the APs.
- The emulated client gets no DHCP offer.
- A DHCP Failure action appears under Connectivity in Marvis Actions for that VLAN ID.
- The administrator downloads the .pcap, confirms that no offer was returned, and adds the scope.
- A Test Now on the Marvis Minis page passes, and the action clears from Marvis Actions, which can take up to 24 hours.
Wireless Minis needs every AP in the site on firmware 0.14.29313 or later. A site with older APs mixed in can see its validations interrupted.
Common mistakes
Thinking Minis needs extra sensors. It runs on the existing APs and switches. No sensor hardware, software agent or test client is needed.
Looking for failures only on the Minis page. Failures also appear in Marvis Actions, under Connectivity.
Expecting an action to vanish the moment you fix the cause. It can take up to 24 hours to clear.
Starting Test Now during a scheduled run. A manual validation cannot start while an automatic one is in progress.
What to remember for the exam
- Marvis Minis is a digital experience twin that emulates clients to test the network.
- It runs hourly, even with no clients, and on demand with Test Now.
- Wireless Minis runs on all Mist AP models; enabled by default from AP firmware 0.14.29313.
- Wired Minis runs on EX4100, EX4400, EX4650 and QFX5120 with Junos OS 25.4R2 or later.
- Wireless checks: DHCP, DNS, ARP, RADIUS, application reachability. Wired adds CURL, 802.1X and traceroute.
- Failures appear in Marvis Actions under Connectivity; pcaps can be downloaded.
- Needs Marvis for Wireless or Marvis for Wired; no separate Minis subscription.
Check yourself
A retail site has no users before 9:00, yet a DHCP failure is reported at 7:00. Which feature most likely found it?
Marvis Minis, which emulates clients from the APs and validates DHCP hourly even when no clients are connected.
Under which Marvis Actions category do Minis failures appear?
They appear under the Connectivity category.
What does an administrator click to run Minis right after a configuration change?
Test Now, at the top right of the Marvis Minis page after selecting the site.
Topic 3 of 3 in Marvis Virtual Network Assistant
Test yourself on Marvis Virtual Network Assistant
The full Juniper JNCIA-MistAI JN0-253 question bank has 668 questions, with timed practice exams and an explanation for every answer.
This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.