User Interfaces · Topic 4 of 4

Managing, Comparing and Loading Configuration Files

Learn Junos set, delete, deactivate, save, show compare, file commands and load override, merge, replace and set for the JNCIA-Junos JN0-106 exam.

  • 5 min
In a nutshell
  • deactivate marks a statement inactive:; activate restores it; delete removes it.
  • insert reorders terms in policies and firewall filters.
  • save in configuration mode writes the candidate to your home directory.

What it is

Junos gives you a set of configuration mode commands to modify statements, and file commands to save, view, compare and load whole configurations. Together they let you copy a configuration between devices, keep a backup in a file, and check exactly what will change before you commit.

Everything you load or edit lands in the candidate configuration. Nothing becomes active until you commit.

Config fileon flash or pastedloadCandidateshow compareReview changescommitActive configurationsaveFile in home directory

How it works

Modifying statements

CommandEffect
set <statement>Adds a statement or changes its value
delete <statement>Removes a statement and everything under it
deactivate <statement>Keeps the statement but marks it inactive: so it is ignored at commit
activate <statement>Removes the inactive mark
copy <statement> to <new>Copies a statement under a new name, for example one interface to another
rename <statement> to <new>Changes a statement's name
insertMoves an ordered item, such as a policy or filter term, before or after another
annotate <statement> "<text>"Adds a comment that appears above the statement
replace pattern <old> with <new>Replaces matching text throughout the candidate

deactivate is handy for testing. The statement stays in the file, shown with an inactive: tag, and you can bring it back with activate instead of typing it again.

[edit]
user@R1# deactivate interfaces ge-0/0/2

[edit]
user@R1# show interfaces
ge-0/0/1 {
    unit 0 {
        family inet {
            address 10.1.1.1/24;
        }
    }
}
inactive: ge-0/0/2 {
    unit 0 {
        family inet {
            address 10.1.2.1/24;
        }
    }
}

Order matters in policies and firewall filters, because terms are evaluated top to bottom. New terms are added at the end, so insert is how you place a term earlier.

Viewing configurations

CommandModeShows
show configurationOperationalThe active configuration
show configuration interfacesOperationalOne part of the active configuration
showConfigurationThe candidate at the current level

The default format is the curly-brace hierarchy. Adding | display set, as in show | display set, turns it into flat set commands, which are easy to copy into another device.

Comparing configurations

Pick the comparison by what you want to check:

  • Candidate against active: show | compare in configuration mode.
  • Candidate against a saved version: show | compare rollback <n> in configuration mode.
  • Active against a saved version: show configuration | compare rollback <n> in operational mode.
  • Two saved versions: show system rollback <n> compare <m> in operational mode.
  • Two files on the device: file compare files <file1> <file2> in operational mode.

Output uses + for lines that would be added and - for lines that would be removed, grouped under [edit ...] headers that tell you where in the hierarchy the change is.

Saving and managing files

save <filename> in configuration mode writes the candidate to a file in your home directory. At the top level it saves the whole candidate, and at a lower level it saves only that part.

From operational mode, show configuration | save <filename> saves the active configuration. The file commands then manage what you saved.

CommandEffect
file listLists files in a directory
file show <file>Displays a file
file copy <source> <destination>Copies a file, locally or to a remote URL
file rename <old> <new>Renames a file
file delete <file>Deletes a file

file copy can send a configuration to a server, for example with an ftp:// or scp:// destination, which is a simple manual backup.

Loading configurations

Load optionEffect on the candidate
load override <file>Replaces the whole candidate with the file
load merge <file>Merges the file into the candidate; new statements are added, conflicting ones replaced
load replace <file>Replaces only the sections marked with a replace: tag in the file
load set <file>Loads a file of set commands
load patch <file>Applies a file of changes in the compare output format

Use terminal instead of a file name to paste the text, then press Ctrl+D to finish. Add relative with load merge or load replace to load the text at your current hierarchy level instead of the top.

[edit]
user@R1# load merge terminal relative
[Type ^D at a new line to end input]
load overrideCandidatereplaced by the filecommitActiveload mergeCandidatefile added on topcommitActive
Exam tip

To copy a working configuration to a new device, save it with | display set, then use load set terminal on the new device, check it with show | compare, and commit.

Common mistakes

Confusing delete and deactivate. delete removes the statement. deactivate keeps it in the configuration but ignores it at commit.

Using load override for a small change. load override wipes the whole candidate, including the root password and management settings, and replaces it with the file. For an addition, use load merge.

Comparing the wrong configurations. show | compare in configuration mode compares the candidate with the active one. show configuration in operational mode has no candidate to compare, so it compares the active one with a rollback.

Expecting a loaded file to be active. Every load changes only the candidate. You still need to commit.

Watch out

After load override, check with show | compare before you commit. A file from another device may change the host name, addresses and users all at once.

What to remember for the exam

  • deactivate marks a statement inactive:; activate restores it; delete removes it.
  • insert reorders terms in policies and firewall filters.
  • save in configuration mode writes the candidate to your home directory.
  • show | compare shows candidate against active; add rollback n to compare with a saved version.
  • load override replaces everything; load merge combines; load replace uses replace: tags; load set reads set commands.
  • terminal lets you paste input, ending with Ctrl+D; relative loads at the current level.

Check yourself

  • Which load option replaces the whole candidate configuration with a file?

    load override. load merge would combine the file with the existing candidate instead.

  • What does deactivate do to a statement?

    It keeps the statement but marks it inactive:, so it is ignored when the configuration is committed.

  • How do you see what will change before you commit?

    Run show | compare in configuration mode to compare the candidate with the active configuration.

Topic 4 of 4 in User Interfaces

Test yourself on User Interfaces

The full Juniper JNCIA-Junos JN0-106 question bank has 1,155 questions, with timed practice exams and an explanation for every answer.

This study guide is independent and is not affiliated with, endorsed by, or sponsored by Juniper. Vendor names, certification names and exam codes are trademarks of their respective owners and are used for identification only.